Secure and future-ready
Built on a secure and upgradeable platform designed to support evolving access technologies and long-term compatibility.
One platform, multiple credentials
Support smartcards, mobile credentials, QR codes and PIN authentication across a single reader portfolio.
Way Base
Everyday access, the foundation of Nedap Way
The Way Base is the foundation of the Nedap Way reader portfolio, designed for secure and effortless building access. Combining support for smartcards and mobile credentials, it helps organisations transition to modern access technologies at their own pace. Its slim design and intuitive user experience make it a versatile solution for virtually any access point. Built on a secure and upgradeable platform, the Way Base is ready for both today’s and tomorrow’s access needs.
Key benefits
- Supports cards, mobile credentials and digital wallets
- Enables a smooth transition from card-based to mobile access
- Intuitive user interaction through clear visual and audio feedback
- Elegant design for modern building environments
| Dimensions | L x W x H: 135 x 53 x 28 mm (5.3 x 2 x 1.1 inch) |
| Power supply | 10-27 VDC |
| Power consumption | 250 mA |
| Operating temperature | -35°C to +66°C (-31°F to 150°F) |
| Storage temperature | -35°C to +66°C (-31°F to 150°F) |
| Communication protocols | Nedap transparent mode OSDP v2, including secure channel communication and file transfer CR/LF Wiegand |
| Communication interfaces | RS485, Wiegand and USB-C service interface |
| Inputs | 3: open collector; buzzer and 2 LEDs |
| Detection range | Nedap: approx. 15 cm, MIFARE: approx. 5 cm, DESfire: approx. 1 cm |
| LED indicators | Access LED + Status LED + Ambient lighting controlled separately (RGB & dimming) |
| Audio feedback | Audio speaker (100hz – kHz) with volume control |
| Supported cards | Low frequency & high frequency cards Including Prox, Mifare Classic, Mifare Desfire (EV1, EV2, EV3) with proximity check |
| Outdoor rating | IP65 (approx. NEMA4x) protected against water and dust |
These can be found on our partner portal after logging in.
Way QR
Visitor and temporary access
The Way QR combines QR codes, smartcards and mobile credentials in one versatile reader. Designed for visitor, contractor and temporary access workflows, it enables organisations to support multiple credential types through a single access point. Fast scanning and intuitive user feedback create a seamless experience for every visitor journey. Built on the same secure and upgradeable platform as the entire Way portfolio, the Way QR delivers flexibility today and long-term compatibility for the future.
Key benefits
- Combines QR, mobile and card access in one reader
- Optimised for visitor and temporary access workflows
- Fast and reliable QR and barcode scanning
- Supports visitor management integrations
| Dimensions | L x W x H: 135 x 53 x 28 mm (5.3 x 2 x 1.1 inch) |
| Power supply | 10-27 VDC |
| Power consumption | 250 mA |
| Operating temperature | -35°C to +66°C (-31°F to 150°F) |
| Storage temperature | -35°C to +66°C (-31°F to 150°F) |
| Communication protocols | Nedap transparent mode OSDP v2, including secure channel communication and file transfer CR/LF Wiegand |
| Communication interfaces | RS485, Wiegand and USB-C service interface |
| Inputs | 3: open collector; buzzer and 2 LEDs |
| Detection range | Nedap: approx. 15 cm, MIFARE: approx. 5 cm, DESfire: approx. 1 cm |
| LED indicators | Access LED + Status LED + Ambient lighting controlled separately (RGB & dimming) |
| Audio feedback | Audio speaker (100hz – kHz) with volume control |
| Supported cards | Low frequency & high frequency cards Including Prox, Mifare Classic, Mifare Desfire (EV1, EV2, EV3) with proximity check |
| Outdoor rating | IP65 (approx. NEMA4x) protected against water and dust |
These can be found on our partner portal after logging in.
Way Keypad
Additional certainty where security matters most
The Way Keypad combines smartcards, mobile credentials and PIN authentication in a single reader, providing additional security where it matters most. Designed for sensitive access points, it enables organisations to apply the right level of authentication without compromising the user experience. Its illuminated keypad and intuitive feedback ensure reliable operation in any environment. Built on the same secure and upgradeable platform as the entire Way portfolio, the Way Keypad delivers long-term reliability and consistent deployment across your access infrastructure.
Key benefits
- Supports PIN, card and mobile authentication in one reader
- Enables two-factor authentication for enhanced security
- Illuminated keypad for reliable operation in all conditions
- Ideal for security-sensitive access points
| Dimensions | L x W x H: 135 x 53 x 28 mm (5.3 x 2 x 1.1 inch) |
| Power supply | 10-27 VDC |
| Power consumption | 250 mA |
| Operating temperature | -35°C to +66°C (-31°F to 150°F) |
| Storage temperature | -35°C to +66°C (-31°F to 150°F) |
| Communication protocols | Nedap transparent mode OSDP v2, including secure channel communication and file transfer CR/LF Wiegand |
| Communication interfaces | RS485, Wiegand and USB-C service interface |
| Inputs | 3: open collector; buzzer and 2 LEDs |
| Detection range | Nedap: approx. 15 cm, MIFARE: approx. 5 cm, DESfire: approx. 1 cm |
| LED indicators | Access LED + Status LED + Ambient lighting controlled separately (RGB & dimming) |
| Audio feedback | Audio speaker (100hz – kHz) with volume control |
| Supported cards | Low frequency & high frequency cards Including Prox, Mifare Classic, Mifare Desfire (EV1, EV2, EV3) with proximity check |
| Outdoor rating | IP65 (approx. NEMA4x) protected against water and dust |
These can be found on our partner portal after logging in.
Get in touch with one of our experts
Interested in learning more? Fill out the form below and one of our team members will get back to you as soon as possible. We’re happy to answer your questions and discuss how we can help.