TOP
blue_controller

AEOS Blue door controller

Intelligence at your door

We designed AEOS blue to last at least 15 years. Every controller connects a piece of your building to the AEOS access control system, by connecting existing locks, sensors and alarms to it. Every controller functions both autonomously and online in a secure network to guarantee security in any case.

Product Name AEOS Blue AP7803(m) door controller
Dimensions Housing: 230 x 165 x 65 mm (H x W x D)

Module: 122 x 120 x 35 mm (H x W x D)

Weight Housing incl. module: approx. 700 g, module: approx. 200 g
Housing PC ABS
Temperature range Housing: operation: 0˚C to 45˚C, storage: -30˚C to 65˚C

Module: operation: 0˚C to 55˚C, storage: -30˚C to 65˚C

Relative humidity 20% to 90% (non-condensing)
Controller 800 MHz CPU, 256 MB SDRAM, 2 GB Flash memory
Ethernet connection 10/100 Mbps, RJ45
485bus connection RS485 based (non-isolated), jumper selectable end of line, support for up to 32 units
Power over Ethernet PoE+: IEEE 802.3at
Readers: 500 mA @ 12 VDC (shared by both readers)
Locks: 600 mA @ 12 VDC (shared by both locks)
PoE: IEEE 802.3af, max. 500 mA @ 12 VDC (readers only)
External power supply 12-27 VDC (min. 250 mA, max. 1.5 A @ 12-27 VDC)
Readers: 500 mA @ Vin (shared by both readers)
Locks: 600 mA @ Vin (shared by both locks)
Readers 2 x RS485 or 2 x Wiegand
Inputs 2 x 3 secured inputs (Door monitor, Manual unlock, Emergency unlock)

2 digital inputs (AC OK, Battery low)

Outputs 2 x 1 relay, dry contacts (NC, COM, NO), max. 30 VDC, max. 2 A

2 x 3 open collector outputs (Green LED, Red LED, Beeper), max. 20 mA each

Tamper detection 1 optical tamper sensor (AP7803)

1 digital input (for connecting external tamper switch)

Status LEDs 1 Status LED, 1 Power LED, 2 Reader LEDs
Ethernet wiring UTP CAT 5, max. 100 m
485bus wiring 1 x 2 x 0.22 mm2 shielded (100-120 Ω), max. 1200 m
External power supply wiring 2 x 0.5 mm2 shielded, max. 5 m
Reader wiring RS485 excl. power: 1 x 2 x 0.22 mm2 shielded, max. 1000 m (depending on reader)

RS485 incl. power: 2 x 2 x 0.22 mm2 shielded, max. 150 m (depending on reader)

Wiegand: n x 0.22 mm2 shielded, max. 150 m (depending on reader)

Sensor wiring n x 0.22 mm2, max. 100 m
SAM socket 1x SAM socket

 

For firmware & technical documentation, please log-in on our partner portal.

 

Your investment…

20% hardware, 80% software

Since we only have one controller, we keep improving the software during the whole lifetime. You invest 80% of the money in its software.

This means practically no loss of investment when you decide to move out for example.

  • Updatable software
  • Software based behavior, adaptable to any situation
  • Open standards and interfaces
  • SAM socket